Automist® Tap Mount
Automist® is an award-winning safety device that integrates seamlessly into existing homes to offer volume protection. A reliable and cost-effective solution, Automist® targets at-risk rooms such as the kitchen, where most fires start. Unlike other fire suppression systems, Automist® can be run from a standard domestic mains water supply, installing almost invisibly underneath a standard tap. Installation disruption is minimal and annual maintenance involves only a simple and quick test. Automist® uses well-established water mist technology to protect life and property, with only 10% of the water usage of a traditional sprinkler system. The system was independently tested at the BRE.
Automist® is a fire protection device that fills the gap between fire extinguishers and traditional sprinkler systems. Whether you’re a homeowner looking for peace of mind from kitchen fires, or a landlord responsible for safeguarding your tenants, Automist® is changing the way people think about domestic fire protection. Automist® uses a high pressure pump to generate a fine water mist from nozzles mounted under a standard tap. The system is designed to protect the kitchen, one of the most fire-prone locations.
Water flow – 5.6 litres per minute
Trigger – conventional 57°C heat
detector and/or optional manual call point
Protected Area – 32 m2 area protection per pump with fire hazards up to 4m away from each spray head
Run time – 10 mins default or configurable with a fire panel
Installation equirements – Reliable water supply (6 lpm flow and 1 -10 bar pressure) connected with a standard BSP ¾” fitting. 230V 50Hz electrical supply on an independent circuit.
Automist® Tap Mount must be specified, maintained and commissioned by an Accredited Installer such as Crimewatch Alarms. For more information please contact us.
Automist is the registered trademark of Plumis Ltd. Plumis Ltd Copyright 2016. All Rights Reserved.